About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsStenter Finishing Machine

60m/min Textile Stenter Machine With Conduction Oil Heating

I'm Online Chat Now

60m/min Textile Stenter Machine With Conduction Oil Heating

60m/min Textile Stenter Machine With Conduction Oil Heating
60m/min Textile Stenter Machine With Conduction Oil Heating 60m/min Textile Stenter Machine With Conduction Oil Heating

Large Image :  60m/min Textile Stenter Machine With Conduction Oil Heating

Product Details:

Place of Origin: CHINA
Brand Name: VIROCK
Certification: ISO9001
Model Number: VK-NM

Payment & Shipping Terms:

Minimum Order Quantity: 1 SET
Packaging Details: Wooden case
Delivery Time: in 90 days
Payment Terms: L/C, D/A, T/T
Supply Ability: 4 sets per month
Detailed Product Description
Padder Type: Two/Three Bowl Padder Chamber Width Adjustment: Individually
Machine Condition: Brand New Exhaust No.: Optional
Exhasut Controlled By: Inverter Guide Roller Dia.: 125mm
Packing Standard: Export Packing Pin/clip Type: Monforts Type
High Light:

60m/min Textile Stenter Machine


Conduction Oil Heating Textile Stenter Machine


380V Stenter Finishing Machine

Different Fabric Textile Stenter Machine 70 T With Conduction Oil Heating​



1. Product Description

Stenter machine can be widely used in woven fabrics, knitted fabrics and other textile finishing equipment, a wide range of functions, stability and reproducibility, simple operation, convenient maintenance, energy saving, high degree of automation.



2. Technical parameters:

Origin China


Main Matching Fabric open width fabric (70~350g/m²) made
of cotton, cotton/polyester,wool,synthtic fiber and
other blended fibers
Heat source natural gas/circulating conduction oil/steam
Stentering type hot air circulating
Holding type pin+clip
Chain type pitch 60mm,oil-free lubricated
Rail type carbon steel+polymer wearing strip
Working type horizontal return chain
Working width 1000-3600mm
Working speed 5-60m/min
Chamber Nos 2-15
Chamber length 3000mm
Insulating board thickness 150mm
Temperature of chamber 100~230ºC
Pinning & brush overfeed ratio -20%~40%
Temp.& Breadth adjustment type separately adjust on each chamber
Capacity of machine 61.5kw+22.75kw*chamber*Nos
Standard machine power supply 380V/3P/50HZ
Control power supply 220V/380V
Steam specification of steam box 3-6kg/cm²
Steam comsuption of steam box 100-150kg/h
Compressed air 0.35-0.6MPa
Total weight 14T+5.8T/chamber*Nos



3.  Stenter chamber features:


1) Chamber equipped with double filters.

A suitable filter is provided just above the heat exchanger or in case of direct fired Natural Gas Burners, in the duct. The filter is easily accessible and can be cleaned standing outside the chamber while the machine is in operation. A second security filter is also provided.


2) Exhaust system.

The machine are provided with suitable quantity of exhausts to let out the moist and contaminated air efficiently from the chambers. The exhaust blowers are supplied with frequency controllers and moisture sensors to maintain uniform moisture and excellent drying results.


3) Heat recovery system.

The machine can be equipped with suitable heat recovery systems to pre-heat atmospheric air with the help of exhaust air, or to refeed into the stenter for higher temperature or to heat water to be used in processing machines or in boiler as feed water.



The machine is designed for woven and weaving fabric’s dehydrating, finishing, drying and heat setting.

Competitive Advantage:

1)International standard

2)Applicable to woven and weaving fabric

3)Using infrared selvedge tracking system to make sure the fabric can on the faller accurately.

4)Hot air circulation oven reduce your cost and increase dehydration rate


Contact Details

Contact Person: shirley

Send your inquiry directly to us (0 / 3000)