3-mesh hot air Finishing stenter , customized , humanization design

Gas heated Stenter finishing machine, Hot air setting , Energy saving

1. Description:

2. Machine applications:

This machine is applicable to extending and heat setting of fabrics, such as pure cotton which gram per square meter is 50-400, polyester cotton and other blended fabrics.

3. Functions of stenter machine:

    1) Heat setting is done by the stenter for lycra fabric, synthetic and blended fabric.

    2) Width of the fabric is controlled by the stenter.

    3) Finishing chemical apply on fabric by the stenter.

    4) Loop of the knit fabric is controlled.

4. Process:

Open width entry --- Infrared center device ---- J-scray ---- Padder --- Tension applicator --- Auto weft straightner ---- Expanding roller ---- Lower overfeeding screw expending ---Upper overfeeding --- E+L Edge detecting & two-finger uncurler device--- Clipping-on ---- Chambers for heat setting ---Air cooling --- Clipping-off ---- End section --- Plaiting & batching.

5. Feature advantages:

1) Energy saving;

2) Temperature in the chamber is even;

3) High production;

4) High quality of finishing.