Product Details:
Payment & Shipping Terms:
|
| Entry Rail Type: | Vertical/horizontal Type | Fabric Hold By: | Pin/clip/combined/belt |
|---|---|---|---|
| Exhaust No.: | According To The Chamber Quantity | Entry Rail Length: | Customized |
| Chamber Quantity: | Optional | Heating Source: | Electricity/oil/gas/steam/combined |
| Pin/clip Type: | Monforts Type | Fabric Exist: | Batching |
| High Light: | hot air stenter,stenter finishing machine |
||
Finishing Heat Setting Stenter , vertical / horizontal chain , customized
1. Stenter General Application:
This stenter can be applied to any fabric stretch or heat setting. It is suitable for wool spinning, cotton spinning, knitting, chemical fiber, garment fabric, industrial textiles etc.
2. Main technical index
| Main Matching Fabric | open width fabric (70~350g/m²) made of cotton, cotton/polyester,wool,synthtic fiber and other blended fibers |
| Heat source | natural gas/circulating conduction oil/steam/electricity/combined |
| Stentering type | hot air circulating |
| Holding type | pin/clip/combined |
| Chain type | oil-free lubricated/ lubricated |
| Rail type | carbon steel+polymer wearing strip |
| Working type | horizontal/vertical return chain |
| Working width | 800-3600mm |
| Working speed | 5-100m/min |
| Chamber Nos | 1-12 |
| Chamber width | customized |
| Insulating board thickness | 150mm |
| Temperature of chamber | 100~230ºC |
| Pinning & brush overfeed ratio | -30%~80% |
| Temp.& width adjustment type | separately adjust on each chamber |
| Capacity of machine | 61.5kw+22.75kw*chamber*Nos |
| Standard machine power supply | 380V/3P/50HZ;220V/3P |
| Control power supply | 220V/24V |
| Steam specification of steam box | 3-6kg/cm² |
| Steam comsuption of steam box | 100-150kg/h |
| Compressed air | 0.35-0.6MPa |
| Total weight | 14T+5.8T/chamber*Nos |
3. Features of the machine:
1) Permit high production speeds with high efficient chambers.
2) By virtues of advanced PLC system and computerized control with interface operation, the machine is easy to be operated.
3) The best design of airing system makes it possible to adopt the air circulation quantity penetrates to the fabric uniformly, the handle of fabric and softness can be increased.
4) Thanks to the exhaust-air inverter control system, the energy can be saved and the high production can be get with efficient cost.
5) Each rail width of setting chamber can be adjusted by seperated driving motor at the same time or independently at different time.
6) The infeed to delivery zone can be extended by variable fabrics treatment requirement.
4. Machine flow-chat:
1) Process flow for some special product
Open-width entry --- Expanding---- Photocell device & uncurler device--- pinning-on ---- Chambers for heat setting ---Air cooling --- pinning -off ---- End section --- Roll.
2) Process flow for knitted fabrics
Feeding frame-> infra-red centering-> two-bowl oblique padder-> pneumatic fabric tensioner-> four-roll weft straightener-> lower overfeeding-> mechanical weft straightener-> bow roller expanding-> upper overfeeding-> infra-red selvedge-detection-> three-finger uncurling and plate uncurling -> brush overfeeding-> pinning -> extended rail-> heat-setting chambers-> air cooling-> tension adjustment-> batcher and plaiter
3) Process flow for woven fabrics
Feeding frame-> infra-red centering-> two-bowl oblique padder-> pneumatic fabric tensioner-> photoelectric weft straightener-> lower overfeeding-> upper overfeeding-> infra-red selvedge-detection-> two-finger uncurling-> pinning -> heat-setting chambers-> air cooling-> tension adjustment-> water cooling-> plaiter
Contact Person: shirley
Simple Operation Cloth Finishing Machines , Inverter Controlled Heat Setting Stenter
High Production Stenter Finishing Machine Customized Design For Woven Knits
Low Tension Cloth Stenter Finishing Machine For Mosquito - Net Stretching / Heat Setting
Open Width Fabric Stenter Machine Full Converter Controlled With Strong Rail
Hot Air Textile Finishing Stenter Humanism Design Heat Preservation 3600mm Working Width
Knitted Fabric Heat Setting Machine , Textile Finishing Equipment Working Width 1200-3400mm
1400-3800mm Textile Finishing Machine With Slant Padder / 1 Year Warranty
Low Tension Rope Scouring And Bleaching Combined Machine High Efficiency
Energy SavingScouring And Bleaching Range Machine For Printing Woven Fabric
Speed 180 M / Min Rope Bleaching Range Machine For Printing Woven Fabrics
