Woven Fabric Stenter Machine Humanized Design With Inverter Controlled

1. Stenter Machine Application:

Stenter machine is electrical machines used in textile industry for stretching or stentering thin fabrics such as muslin. Stenter electrical machines are called as stenter hook. In stenter open compactor fabrics enter. Here Cotton fabric shrinks widthwise & weft are distorted due to bletching & dyeing process.

2. Functions of stenter Machine:

1) Spirility measured by the stenter m/c
2) It works as textile machinery and equipment
3) Stenter can control shrinkage property
4) Stenter mc is used for curing treatment for resin, water repellent fabric
5) Heat setting is controled by the stenter for lycra fabric, synthetic and blended fabric.
 

3. Parts of Stenter Machine for Textile Industry are given bellow-

electrical cabinets
Stenter Machine Parts
Paders
Cooling drums
Burners
Heat recovery unit
Weft straightner
Circulating fans
Exhaust fans
Winder
Clips
Pins
I.R
Roller of Attraction

4. Standard specification of a stenter machine given below :

Power 380v/ 220v  3 Ph. 50 Hz.
Certification ISO9001
Hand Left or right hand
Nominal Width 2000mm
Adjusting Width 700 – 1800mm
Nominal Speed 10-100m/min
Overfeeding Range 10%+30%
Temperature in Chamber With Thermo Oil – 220 C having mobile therm 594 or equivalent with inlet temperature of 270 C at radiator inlet
Heat Source Oil/Steam/Gas/Electricity
Fabric Held Pins/Clips
Delivering Plaiting/Batcher
Edge Controlling Red- infrared edging sensor
Guide Rail Lubricated steel tracks
No. of Chamber: 2-15