About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsFabric Stenter Machine

Woven Fabric Stenter Machine Humanized Design With Inverter Controlled

Good quality Heat Setting Stenter for sales
I'm Online Chat Now

Woven Fabric Stenter Machine Humanized Design With Inverter Controlled

China Woven Fabric Stenter Machine Humanized Design With Inverter Controlled supplier

Large Image :  Woven Fabric Stenter Machine Humanized Design With Inverter Controlled

Product Details:

Place of Origin: CHINA
Brand Name: VIROCK
Certification: ISO9001

Payment & Shipping Terms:

Minimum Order Quantity: 1 SET
Packaging Details: wooden case
Delivery Time: 90 days
Payment Terms: T/T
Supply Ability: as required
Contact Now
Detailed Product Description
Overfeeding Ratio: -10% To 30% Edge Uncurler Type: Two/Three-finger Uncurler Device /flat-plate Type
Exhaust No.: Optional Rail Type: Horizontal
Padder Rubber Material: NBR Padder Roller Diameter: 400mm
Padder Type: Finishing Padder Exit Type: Plaiting/Batching

High - efficiency Fabric stenter machine , good thermal insulation , energy saving




1. Stenter Machine Application:

Stenter machine is electrical machines used in textile industry for stretching or stentering thin fabrics such as muslin. Stenter electrical machines are called as stenter hook. In stenter open compactor fabrics enter. Here Cotton fabric shrinks widthwise & weft are distorted due to bletching & dyeing process.

2. Functions of stenter Machine:

1) Spirility measured by the stenter m/c
2) It works as textile machinery and equipment
3) Stenter can control shrinkage property
4) Stenter mc is used for curing treatment for resin, water repellent fabric
5) Heat setting is controled by the stenter for lycra fabric, synthetic and blended fabric.
3. Parts of Stenter Machine for Textile Industry are given bellow-

electrical cabinets
Stenter Machine Parts
Cooling drums
Heat recovery unit
Weft straightner
Circulating fans
Exhaust fans
Roller of Attraction

4. Standard specification of a stenter machine given below :

Power 380v/ 220v  3 Ph. 50 Hz.
Certification ISO9001
Hand Left or right hand
Nominal Width 2000mm
Adjusting Width 700 – 1800mm
Nominal Speed 10-100m/min
Overfeeding Range 10%+30%
Temperature in Chamber With Thermo Oil – 220 C having mobile therm 594 or equivalent with inlet temperature of 270 C at radiator inlet
Heat Source Oil/Steam/Gas/Electricity
Fabric Held Pins/Clips
Delivering Plaiting/Batcher
Edge Controlling Red- infrared edging sensor
Guide Rail Lubricated steel tracks
No. of Chamber: 2-15

Contact Details

Contact Person: shirley

Tel: +8613974856209

Send your inquiry directly to us (0 / 3000)