Payment & Shipping Terms:
|Main Drive System:||Double Drive||Main Drive Motor Capacity:||11Kw X 2|
|Fabric Exit:||Plaiting/ Batching||Fabric Cooling:||Air Cooling/water Cooling|
|Chamber Circulation Motor Capacity:||5.5/7.5 Kw||Rail Material:||Steel/iron Casted|
|Rail Type:||Horizontal||Producing Fabric Type:||Knits/woven Etc.|
Fabric streching & setting stenter , Temperature even , Good thermal insulation
1. Working chart :
Open width entry --- Infrared center device ------J-Scray ---- Padder with various tension applicator --- Weft straightner ---- Screw expanding & overfeeding device --- Edge Photocell & uncurler device --- Pinning-on ---- Chambers for heat setting ---Air-jet cooling --- Pinning-off ----- End section --- Plaiting.
2. Functions of stenter machine:
1) Heat setting is done by the stenter for special 3-mesh textile.
2) Width of the 3-mesh textile is controlled.
3) Moisture of the 3-mesh textile is controlled.
4) GSM of the3-mesh textile is controlled.
5) Fabric is dried by the stentering process.
6) Shrinkage property of the 3-mesh textile is controlled.
3. Stenter Chamber features:
Each chamber 3 meters long, with twin air system, the frame of chamber is made from 4 mm steel plates. The heat- insulating boards thickness is 120mm, filled with insulating material and silicone rubber strips used for sealing. The bottom of the chambers heat-insulating boards thickness 80mm.
Double filter: Each chamber has double filters; it’s easier for machine maintenance.
Contact Person: shirley