Payment & Shipping Terms:
|Fabric Hold By:||Pin/clip/combined||Main Drive:||Single/double Drive|
|Fabric Working Width:||As Required||Machine Painting:||Optional|
|Heating Source:||Gas/oil/steam/eletricity||Rail Length:||Custom Tailor|
|Rail Type:||Horizontal||Cooling Type:||Air-jet Cooling|
heat setting stenter,
stenter finishing machine
Open width knits Fabric stenter Machine , Low tension design , Inverter controlled
1. Stenter Application:
This machine is used for stretching, drying and setting the cotton, polyester,and man-made fabric.
2. Technical Flow:
Plaint Entry --- Infrared center guider ---- 2-Roller Padder -- Infrared center guider --- Photoelectric Weft Strangtener – Overfeeding -- Edge Spreader, Infrared Edge Sensor -- Pin or Clip or Combied Pin-Clip -- Stentering Drying Chambers – Air-Jet Cooling -- -- Swing Outlet.
3. Standard Features
CONTROL Control panel for the machine will be fabricated with powder coating after defrosting procedure panel will be incorporated with the electric switch gears as per I.S. std of required capacity.
DRIVE The machine running with D.C. drive, main drive motor of padding mangle and Stenter are teps D.C. motors reduction gear box is coupled with the main motor of Stenter machine.
FINISHING Machine will be finished with red oxide putty & primmer paint and finally with 3 coats of industrial paint. Optionally finished with powder coating process.
IMPORTANT NOTE The length & width of the Stenter machine, no. of the chambers, HP. Of D.C. / A.C. motors varies according the buyers requirements operating manual wiring diagram of the control panel & foundation plan will be provided with the machine.
Contact Person: shirley