Payment & Shipping Terms:
|Overfeeding Ratio:||-10% To 30%||Entry Rail Length:||3m/6m|
|Max. Chamber Working Temperature:||230 Degree||Chain Type:||Horizontal|
|Edge Controller:||Three-finger/Two-finger Uncurler Device||Packing:||Export Standard|
|Fabric Hold By:||Pin/clip/combined||Exit Type:||Plaiting/Batching|
Simple operation textile stenter Machine , Humanized design , Inverter controlled
1. Stenter functions:
* Heat setting and fix different kinds of textiles.
* To control the fabric width.
* To finishing chemical applying on various types of textile.
* To control the moisture of the textile.
* To control the GSM of the textile.
* To dry fabrics.
* To control the shrinkage of the textile.
* Curing treatment for resin, water repellent fabric is done.
2. Technical data:
|Roller width:||1400-3600mm||Working width:||
nature gas/ oil/ electricity/steam
|Width adjustment range:||
|2-15 pcs||Temperature of chamber:||
|Fabric held by:||
|Air pressure:||above 0.5mpa|
|Padder type||Finishing/Dyeing||Installed power:||
3. Machine features:
1) Drying chambers: To dry the fabric or to fix the finishing chemicals by hot air from the blowers. The blower sucks hot air from radiator and blow it into the nozzles through which drying occurs. Inside the drying chamber also contains width adjustment spindle which can adjust the each chamber's working width, and pin/clip chain track.
2) Gas direct heating system:
It equipped with auto-cut off safety burners, Maxon /Weishaupt/ Reillo brand.
The temperature rising up very fast, short the loading time of the machine.
Anti-explosive door designs in heating chamber.
3) Low pollution, easy to maintenance, the most clean heating system for environmental protection.
4) Humanized designs for double filters in the chambers. The upper layer can be draw out at anytime for cleaning the filters,it also can prevent the dusts to dirty the fabrics.