Payment & Shipping Terms:
|Padder Roller Quantity:||Two/three Bowel||Padder Roller Dia.:||400mm|
|Padder Drive Power:||15Kw||Exhaust No.:||2/3 Sets|
|Dryer Quantity:||As Required||Guide Roller Dia.:||125mm|
|Packing Standard:||Export Packing||Pin/clip Type:||Monforts Type|
Friendly HMI operation Textile Stenter Machine , Even temperature , Multi-functional
1. Machine Application:
The VIROCK Stenter is enhanced and refined with the European Technology and the technical advice and feedback from the end users. It is designed to match the requirements of various kinds of fabric., from fabric feeding to overfeed, from stentering to cooling and to fabric exit. It is done just by adjusting the mechanical and electrical device on the machine, Various options are available to fulfill different requirements.
|Roller width:||1400-3600mm||Working width:||
nature gas/ oil/ electricity/steam
|Width adjustment range:||
|2-15 pcs||Temperature of chamber:||
|Fabric held by:||
|Air pressure:||above 0.5mpa|
|Padder type||Finishing/Dyeing||Installed power:||
3. Stenter chamber features:
1) Chamber equipped with double filters.
A suitable filter is provided just above the heat exchanger or in case of direct fired Natural Gas Burners, in the duct. The filter is easily accessible and can be cleaned standing outside the chamber while the machine is in operation. A second security filter is also provided.
2) Exhaust system.
The machine are provided with suitable quantity of exhausts to let out the moist and contaminated air efficiently from the chambers. The exhaust blowers are supplied with frequency controllers and moisture sensors to maintain uniform moisture and excellent drying results.
3) Heat recovery system.
The machine can be equipped with suitable heat recovery systems to pre-heat atmospheric air with the help of exhaust air, or to refeed into the stenter for higher temperature or to heat water to be used in processing machines or in boiler as feed water.
Contact Person: shirley