Payment & Shipping Terms:
|Installation Power:||It Depends On Details Specifications||Machine Working Width:||1400mm - 3600mm|
|Drive Mode:||Full PLC Inverter Controlled||Main Drive Type:||Single/double Drive|
|Chamber Door Thickness:||150mm||Diameter Of Padder Roller:||400mm|
|Packing:||Export Packing||Pin/clip Type:||Monforts Type|
Knitted Fabric Stenter Machine,
Nonwoven Fabric Stenter Machine,
3600mm roller textile stenter machine
Nonwoven Knitted Fabric Stenter Machine Heat Setting Textile Finishing Machine
1. Machine applications:
This machine is applicable to extending and heat setting of fabrics, such as pure cotton which gram per square meter is 50-400, polyester cotton and other blended fabrics.
Equipped with mangle, it can also carry out other treatments like squeezing and resin padding.The machine is suitable for heat setting of fabric, Chemical Finishing especially on woven fabrics.
2. Stenter with Conveyor Belt
Applicable mainly for finishing of Technical Textiles.
The range can be used multifunctionally: The fabric can either be laid on the endless conveyor belt made of Teflon coated glass fibres or be pinned in the stentering chains. The endless belt can also be used for centre support of the pinned fabric.
3. Technical specifications:
|Roller width:||1400-3600mm||Working width:||1200-3400mm|
|Heat source:||nature gas||Width adjustment range:||700-3400mm|
|Chambers No.||optional||Temperature of chamber:||100-220℃|
|Fabric held by:||clip/pin/belt||Air pressure:||above 0.5mpa|
|Overfeed range:||-10% to 30%||Installed power:||Approx 120Kw|
4. Feature advantages:
1) Energy saving;
2) Temperature in the chamber is even;
3) High production;
4) High quality of finishing.
Open-width feeding fabric → fabric tensioning device → infrared centring device → two-roller padder (optional) → photoelectric weft straightener (optional) → down overfeeding device → mechanical weft straightening device → screw thread spreading roller → upper overfeeding device → four-finger uncurling edge device (optional) → infrared ray rack detecting edge → pinning on (or clipping on) → several chambers heat setting → one group of cold wind cooling → pinning off (or clipping off) → back overfeeding device → J-box (optional) → open-width swinging doffing (and winding).
Contact Person: shirley