Payment & Shipping Terms:
|Padder Type:||Two/Three Bowl Padder||Chamber Width Adjustment:||Individually|
|Machine Condition:||Brand New||Exhaust No.:||Optional|
|Exhasut Controlled By:||Inverter||Guide Roller Dia.:||125mm|
|Packing Standard:||Export Packing||Pin/clip Type:||Monforts Type|
60m/min Textile Stenter Machine,
Conduction Oil Heating Textile Stenter Machine,
380V Stenter Finishing Machine
Different Fabric Textile Stenter Machine 70 T With Conduction Oil Heating
1. Product Description
2. Technical parameters:
|Main Matching Fabric||open width fabric (70~350g/m²) made
of cotton, cotton/polyester,wool,synthtic fiber and
other blended fibers
|Heat source||natural gas/circulating conduction oil/steam|
|Stentering type||hot air circulating|
|Chain type||pitch 60mm,oil-free lubricated|
|Rail type||carbon steel+polymer wearing strip|
|Working type||horizontal return chain|
|Insulating board thickness||150mm|
|Temperature of chamber||100~230ºC|
|Pinning & brush overfeed ratio||-20%~40%|
|Temp.& Breadth adjustment type||separately adjust on each chamber|
|Capacity of machine||61.5kw+22.75kw*chamber*Nos|
|Standard machine power supply||380V/3P/50HZ|
|Control power supply||220V/380V|
|Steam specification of steam box||3-6kg/cm²|
|Steam comsuption of steam box||100-150kg/h|
3. Stenter chamber features:
1) Chamber equipped with double filters.
A suitable filter is provided just above the heat exchanger or in case of direct fired Natural Gas Burners, in the duct. The filter is easily accessible and can be cleaned standing outside the chamber while the machine is in operation. A second security filter is also provided.
2) Exhaust system.
The machine are provided with suitable quantity of exhausts to let out the moist and contaminated air efficiently from the chambers. The exhaust blowers are supplied with frequency controllers and moisture sensors to maintain uniform moisture and excellent drying results.
3) Heat recovery system.
The machine can be equipped with suitable heat recovery systems to pre-heat atmospheric air with the help of exhaust air, or to refeed into the stenter for higher temperature or to heat water to be used in processing machines or in boiler as feed water.
Contact Person: shirley