800mm 50M/Min Heat Setting Stenter For Wool Spinning

High - Tech Heat Setting Stenter , Fabric Stenter Machine Electric Heated

1. Stenter General Application:

This stenter can be applied to any fabric stretch or heat setting. It is suitable for wool spinning, cotton spinning, knitting, chemical fiber, garment fabric, industrial textiles etc.

2. Main technical index

Form: heated air circulation, single layer horizontal type

Vehicle category: left hand or right hand

Minium working width: 800mm

Speed range: 1-50m/min

Over-feed ratio: -10% - +30

Dryer temperautre: 100-230ºC

Heat source: electricity/gas/oil/etc.

Cloth holding method: needle clamp

Edge detecting form: High precision infrared edge detecting

Guide rail form: lubricating free

3. Usage in medical field:

The Machine flow-chat:

Open-width entry --- Expanding---- Photocell device & uncurler device--- pinning-on ---- Chambers for heat setting ---Air cooling --- pinning -off ---- End section --- Roll.

The outstanding features of this machine used in medical field:

With some special specifications, the stenter can be used in medical field to produce high quality high elasticity bandage with high production.

4. Machine Advantages:

1) Highest drying performance and process control.
2) Very even air flow and temperature in the dryers.
3) Very low specific energy consumption.
4) Extremely strong chains, rails, and pin system.
5) Exactly reproducible finishing results because of a complete automation and recipe administration in the line
6) Available options of heating source: Gas direct, gas indirect, thermal oil, steam, electricity and combinations.

7) Optimum straightening results due to an integrated straightener with shortest possible fabric path to the pinning-on point, available as option.