Payment & Shipping Terms:
|Suitable For:||Cotton Or Cotton Blended Fabrics||Fabric Width:||Less Than 2800m M/1800mm|
|Warranty:||1 Year||After-sale Service:||Available|
|Voltage:||380V||Drive Mode:||Full Inverter Controlled|
|Washing Box Quantity:||As Required||Inverter:||Mistubishi|
Woven fabric Rope scouring bleaching range , Labor energy saving , high production
LMH085B: Suitable for single end cotton or cotton blended fabrics with width less than 2.8 m, such as printing fabric, bleaching cloth, dyeing light color desizing, scouring, pretreatment process before bleaching, daily output of 140,000-210,000m.
LMH088: Suitable for double ends cotton or cotton blended fabrics with width less than 1.8 meters, such as printing fabric, batik cloth, bleaching cloth, lining or light-colored desizing, scouring, pretreatment process before bleaching, daily output of 240,000-290,000 meters.
|Open-width desizing,scouring & bleaching range||Rope desizing,scouring & bleaching range|
|20 hours output||108,000m||216,000m|
|Total power capacity||122.1KW||172KW|
|Steam consumption||About 3.5 ton/hour||About 2.5 ton/hour|
|Water consumption||About 19.15 ton/hour||About 15 ton/hour|
|Labor force||5 persons||3 persons|
|Capillary-effect||12 cm/30min||14 cm/30min|
|Handle feeling||Normal||Very good|
1. The speed is 90-180 m / min,
2. Less labor, high production efficiency.
3. The total consumption of steam, water and electricity in the process is nearly 23-27% lower.
4. The amount of auxiliary agent used in machine is less, reduced the pressure of sewage treatment.
5. Good result of desizing & scouring and high desizing rate.
5. With proper process aids and lower dosage, a higher desizing rate can be obtained.
6. The capillary- effect is over 13 cm / / 30 minutes.
7. The handle feel and whiteness are better.
8. The capacity of the scouring machine can reach 180 meters. The cloth is quickly shuttled in the water. The combination of water washing and rolling water can improve the washing effect and reduce the phenomenon of weft skew weft arc in the flat equipment.
9. Greatly reduce the production cost and increase the profit margin.