Payment & Shipping Terms:
|Padder Type:||Slant/horizontal Type||Entry Rail Length:||3m/4m/6m|
|Fabric Hold By:||Pin/clip/combined/belt||Exhaust No.:||Optional|
|Exhasut Controlled By:||Inverter||Guide Roller Dia.:||125mm|
|Packing Standard:||Export Packing||Pin/clip Type:||Monforts Type|
Friendly HMI Heat setting stenter Machine , Even temperature , Multi-functional
1. Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 60-700g/m2.
2. Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Oasthouse temperautre: 100-230ºC
Heat source: heat-carrying oil, gas,electricity
Cloth holding method: needle clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: High precision infrared edge detecting
Guide rail form: no lubricating oil steel plate guide rail
3. Machine Advantages:
1) Highest drying performance and process control matching any type of fabric due to the technically mature and efficient flow air circulation system.
2) Very homogeneous air flow and temperature distribution due to alternately arranged thermo zones (every 1.5m).
3) Very low specific energy consumption.
4) Extremely robust chains, chain rails, pin bar carriers and clips, needing only little maintenance
5) Exactly reproducible finishing results because of a complete automation and recipe administration in the line
6) Available types of heating: Gas direct, gas indirect, thermal oil, steam, electricity and combinations.
7) Optimum straightening results due to an integrated straightener with shortest possible fabric path to the pinning-on point, available as option.
4. Machine flow-chat:
Open-width entry --- Cloth guider ---- J-scray ---- Padder mangle --- Various tension applicator --- Weft straightner ---- Expanding roller ---- Lower overfeeding --- Screw expending ---Upper overfeeding --- E+L Photocell device & uncurler device--- Clipping/pinning-on ---- Chambers for heat setting ---Air cooling --- Clipping/pinning -off ---- End section --- Plaiting.
Contact Person: shirley